You are currently viewing Tradesperson 1 – Electrician at GGM October 2024

Tradesperson 1 – Electrician at GGM October 2024

Share with your loved ones!


Job type: Full-time

ABOUT GEITA GOLD MINING LTD

Geita Gold Mining Ltd (GGML) is Tanzania’s leading gold producer with a single operation in Geita Region. The company is a subsidiary of AngloGold Ashanti, an international gold producer headquartered in Denver, USA. AngloGold Ashanti (AGA) has operations in more than ten countries across four continents. Geita Gold Mining Limited (GGML) is situated in the Lake Victoria Gold fields of Northwestern Tanzania, only about 120 km’s from Mwanza City and 20 km’s Southeast of the nearest point of Lake Victoria. The company has its main office and operations in Geita, only 5 Km’s west of the fast-growing town of Geita, and a supporting office in Dar es Salaam. Applications are invited from ambitious, energetic and performance driven individuals to fill in vacant position(s) mentioned below:

Position:                           Tradesperson 1 – Electrician
Contract type & Duration: Unspecified time
Department:                      Process Plant
Reporting to:                     Supervisor – Electrical
Number of Positions:        Two (02)

 

GGML is an equal opportunity employer.

 

PURPOSE OF THE ROLE:
The core aim of this role is to effectively execution of the electrical maintenance activities for the entire Process plant and external process plant services (Water pumping stations, CAF plants and underground compressors) to enable the Processing Department to optimize plant production and in a safe manner.

 

QUALIFICATIONS:
•Form IV or Form VI Secondary Education with VETA Qualification Grade I or Full Technician Certificate (FTC) in Electrical Engineering or Diploma in Electrical Engineering.

 

EXPERIENCE:
•A minimum of 5 years working experience as an Electrician as an Electrician in processing plant.

 

MAIN OR KEY ACCOUNTABILITIES:
1.Health, Safety, Environment
•Actively promoting discussion, awareness and improvement of safety and environmental aspects of work practices and striving for workplaces free of injury and illness, by doing the following
•Observe all Safety requirements relevant to the job in hand.
•Report / Tag out any unsafe equipment immediately.
•Utilize all necessary permits where required.
•Attending team toolbox meetings daily and give input.
•Remove all scrap or left-over materials immediately.
•Put /Store all equipment in its proper place.
•Compliance of Personal protective equipment, correct use of PPE
•Carry out work as required or directed and report unsafe equipment immediate.
•Discuss injuries/hazards reported and remedial action that needs taken.
•Always maintain a SAFE work environment
•Electrical workplace (plant wide) to be always kept clean and tidy.
•Electrician must complete a TAKE 5 with every job being done.
•No job will be done without assessing the risks and safety aspects of the job (Take 5. JSA).

 

2.Compliance of Policy and Procedures
•You are required to comply with all GGM Policies and Procedures done in Inductions Training and instructions given.

 

3.Maintenance and availability of plant equipment
•Use your electrical experience and your knowledge of electrical equipment to support the Electrical Supervisors in achieving the required maintenance and availability goals by providing feedback and doing maintenance to the best of your ability.
•Complete all work assignments as given by Supervisors and report any defects on inspections being conducted.
•Ensure all Electrical equipment is always available in a safe and maintained state.

 

4.Role specific
•All planned Electrical work to be completed in set time as planned.
•Maintaining all electrical distribution and switch gear equipment, MCC’s and electrical motors in the Process Plant, CAF plant, TSF , Water Pumping stations ,and compressors specifically:
– All lighting and general power
– Plant distribution grid
– Electrical switch gear and transformer
– Motor control centers (MCC’s)
– All MV and LV Variable Frequency Drivers (VFD’s)
•Doing regular inspections of equipment, repairs, and equipment replacement (especially during shutdowns) as well as electrical motors and others repairs in the workshop.
•Attend and fix electrical faults accordingly.
•Always use correct tools.
•Report any lost or damaged tool or electrical equipment.
•Ensure orderly housekeeping is maintained.
•Toolbox and tools to be inspected and all defective tools to be reported.
•Report / Tag out any unsafe equipment immediately.
•Utilize all necessary permits where required.
•Carry out work as required or directed and report unsafe equipment immediate.

 

ADDITIONAL REQUIREMENTS:
•Computer literacy.
•Knowledge of PLC.
•Possession of MV certificate of competence.
•Experience of MV Switchgear and maintenance thereof.
•Able to read/interpret instrument and electrical drawings.
•Installing and maintaining electrical systems, equipment, and devices.
•Knowledge of National Electric Code and local electric codes.
•Testing equipment, instruments, and systems.

 

MODE OF APPLICATION:
•Please apply by clicking APPLY NOW button below.
•On the portal you will be required to upload your detailed CV, copies of relevant certificates, e- mail and telephone contacts, names and addresses of three referees. Please do not attach certificates that are not related to the qualifications stated above.
•You will also be required to upload a cover / application letter addressed to “Senior Manager Human Resources, Geita Gold Mining Ltd”. Subject should be “Tradesperson 1- Electrician”
•If you struggle to apply via the link provided, please head over to our website  for a step-by-step guide on how to apply for jobs on our recruitment portal (OneHR).
•You will be required to present original certificates if you are contacted for interviews.
•Internal Applicants (those currently employed by AngloGold Ashanti) must have their application letter endorsed by their Head of Department (HOD) or Manager once Removed (MoR).

APPLICATION DEADLINE:
•Applications should reach the above on or before 27th October 2024 at 5:30 PM
•Only shortlisted candidates will be contacted for interviews.

How to Apply:

This is Full-time Job, To submit your application, please follow the link provided below.

CLICK HERE TO APPLY

Check all:  JOBS IN TANZANIA

Go to our Homepage To Get Relevant Information.

Share with your loved ones!

Leave a Reply